Plenio VXA-4300, Руководство пользователя

Страница: 21 / 94

To remove a storage card:
1. Hold the device securely, and then push against the top of the card, as if you were pushing it further into the slot,
letting the card spring out. An audible system sound will signal that the card has been released.
2. Gently remove the card from the slot.
Recharging the VXA-5000/4300
VXA-5000/4300 uses a high-density rechargeable 2200 mAh Lithium Ion battery. The status icon located on the top
right corner of the Main Menu panel indicates the level of the device
’
s battery power.
•
- Battery full charged
•
- Battery charging
•
- Battery level low
•
- Battery level very low, recharging required
•
- Battery power depleted, device will automatically turn off; recharging required
If the battery level becomes low in the course of normal use, recharge the device. If possible, please use the AC
adapter to recharge the VXA-5000/4300. However, this may be difficult when there
’
s no available AC power outlet.
If battery is drained while on the road, you can still recharge the device by using the car charger cable. Recharging
time from empty to full capacity is about six (6) hours in all cases.
If the battery level reaches very low status, the device will automatically turn off. At this stage, you have
about 12 hours to recharge your device or you risk losing all data in the device
'
s internal memory. In the
case when all data is lost, the next power up will prompt you to restore the data.
20
VXA-5000/4300 fundamentals
Hardware interface