Plenio VXA-4300, Руководство пользователя

Страница: 26 / 94

This chapter describes the entertainment programs bundled with your VXA-5000/4300.
If the battery level reaches very low status, the device will automatically turn off. In this case, you have about
12 hours to recharge your device after which you risk losing all data on the device
'
s internal memory. In
case all data is lost, the next time you power on the device you will be prompted to restore the data.
Starting the Navigation application
•
The SD card must be inserted into the unit to launch the Navigation application. Please makesure that the SD card
is not write protected (the slide knob on the left side of the SD card mustbe in the up position). The SD card is
inserted into the device with the gold contacts facing you. Push the SD card all the way into the slot untill you feel a
click. When properly inserted, the SD card should be flush with the opening of the slot.
•
Switch on the unit, and tap on the NAVIGATION icon in the main menu.
•
When the navigation application is launched for the first time, if more than one language is loaded on your SD
card, you will be prompted to choose your language. (Multiple languages files are available on the provided DVD)
•
Before the application loads, an important safety warning disclaimer will be displayed. Please read carefully. You
can choose to hide this screen for subsequent start ups by checking the
“
Hide at startup
”
box before proceeding.
When the device is powered on for the first time, the GPS receiver needs to find strong signals to download the
necessary data before a position solution can be calculated. Please have your car parked in a location with a clear
view of the sky for this initial data download. Depending on conditions, this may take up to 5 minutes before a GPS
position is captured. After this initial procedure, subsequent start ups should provide position solution in less than 1
minute. However, if you have not used the unit for more than a few days, or if you are far away from where you last
powered down the unit, it may take up to 5 minutes again to receive the necessary data again.
25
VXA-5000/4300 fundamentals
Starting the Navigation application