13
OPERATING INSTRUCTIONS
POWER FUNCTION
• Press the
POWER ICON
to turn on the main power to the unit
ON
or
OFF
.
• When the unit is powered
ON
, the unit will only detect the ambient temperature after the fan and heater
ON
for 3
minutes. The control panel will display the heater setting to indicate the unit is power
ON
or
OFF
.
• Functions stored in memory will resume at the last setting.
• If the last temperature setting is
OFF
, the unit will automatically set the temperature to ambient temperature when the
unit is power
ON
next time.
• When the unit is powered
OFF
, the fan will continue to blow for a 60 second cool-down cycle prior to shutting down (a
countdown will be displayed). After 60 seconds, two dash line (- -) will be displayed.
CONTROLS AND DISPLAY
The control panel will display two dash line (- -) when the unit power switch is turned
ON
. Whichever control icon you press will display the current setting of the
corresponding function. Press the control icon again to adjust the setting. Following
adjustment of any setting(s), the unit will resume to display the heater setting after 5
seconds.
HEATER FUNCTION
• Press the
HEATER ICON
to display the current heater setting.
• Press the
HEATER ICON
again to scroll down through the heater settings.
Note:
Long-hold the icon to quickly scroll through settings.
• Set the heater to “
HI
” (High) to have the heater run continually.
• Set the heater to “
OF
” (OFF) to use the flame functions without heat.
• This heater has a thermostat sensor to control the ambient temperature in the surrounding area of the fireplace. The
heater will cycle
ON
and
OFF
to maintain the selected temperature. The thermostat setting range is 82°F (32°C) to
65°F (15°C).
Note
: This may not exactly match the room thermostat reading as their sensors are located in different areas.
FLAME SPEED FUNCTION
• Press the
FLAME SPEED ICON
to display the current flame speed setting.
• Press the
FLAME SPEED ICON
again to cycle through the flame speed settings: 5, 4, 3, 2, and 1.
FLAME BRIGHTNESS FUNCTION
• Press the
FLAME BRIGHTNESS ICON
to display the current flame brightness setting
• Press the
FLAME BRIGHTNESS ICON
again to cycle through the flame brightness settings: 5, 4, 3, 2, 1, and oF (OFF).
• When the flame brightness setting is set to
OF
(OFF), then the flame speed will also OFF together.
