PLAYSTAR LEGACY PS 73161, Инструкция по безопасности и руководство по сборке

Страница: 38 / 44

38
From the inside of the tower, center Sunlight Window flat in
opening as shown.
Secure with #8 x
⁵⁄₈
" truss head screws.
Items for
STeP 1
:
(1) Sunlight Window
(16) #8 x
⁵⁄₈
" truss head screws
SUNLIGHT WINDOW ASSEMBLY
Front View
Inside View
STENCIL SET INSTRUCTIONS
1. Separate stencil strips into individual letters
(fold at perforation to make separating letters
easier). Keep letters organized in alphabetical
order and remove the center of each letter.
2. A permanent marker (purchased separately)
will work well for this project.
3. Test stencil your name or message on a piece
of paper. Draw a bottom guideline on the
paper. Stencil one letter at a time, starting with
the first letter of the word. Space each of the
following letters by placing the left edge of the
stencil so it touches or slightly overlaps the
previous letter.
4. Use your stencil test sheet to aid in aligning
your name or message on the supplied activites
in your playset.
5. When you stencil on a supplied activity, align
each stencil with the bottom edge. Lightly tape
to hold stencil in place. Stencil each letter
following the same procedure as you did on the
test sheet. After stenciling all the letters, leave
gaps in the letters open or fill in with the marker
for your desired look.
Guideline
Gap
Left edge of Stencil