Service Manual
Maintenance
Hard Drive Recovery
Symptoms requiring hard drive recovery include
•
File Test reports bad or missing files.
•
Game fails to finish loading during startup.
•
After resetting the AC power, an error is reported.
•
You are prompted to insert a boot DVD.
•
Erratic Game or Attract Mode.
•
The following screen:
WARNING!
DATA Files Corrupted.
(Game Operation May Become Unstable.)
Use “Test” Switch to Enter Test Mode
and Run “File Test”
Press Start to Continue
To identify corrupt files, press Test, choose System Test Menu and run the File Test.
The only way to repair corrupt files is to recover the hard drive, as detailed below.
Computer
The computer contains sensitive components, including a hard drive. Do not handle roughly. Call your
distributor before servicing its internal components. Ask about warranty information as it relates to the PC.
Do
not
use the PC on/off switch. Turn AC power on or off with the cabinet power switch.
1. With game and PC on, verify that the I/O board has power. If not, see Troubleshooting.
2. Open the Coin door.
3. Open the PC DVD-ROM tray by pressing the Open/Close button on the drive bay.
4. Insert the recovery DVD marked as Disc 1 into the tray.
5. Close the tray by pressing the Open/Close button again.
6. Turn cabinet power switch to OFF. Wait 30 seconds.
7. Turn cabinet power switch to ON.
8. Turn projector power switch to ON so as to monitor recovery process.
9. Recovery begins automatically when PC boots up.
10. If recovery does not begin, check to ensure disc is inserted correctly and is not damaged.
11. Monitor restoration progress.
Do not interrupt power or reset the game during recovery.
12. A message indicates remove disc 1 and insert disc 2.
13. Remove disc 1 as indicated – open DVD-ROM tray if necessary.
14. Insert recovery DVD marked as Disc 2 into the tray.
15. Close the tray by pressing the Open/Close button.
16. Recovery will continue automatically after verifying the disc.
If recovery does not continue or an error message appears, disc may be faulty or damaged.
17. Monitor restoration progress.
Do not interrupt power or reset the game during recovery.
18. A message indicates that recovery is complete.
When instructed to remove disk, open DVD-ROM tray and remove disc.
19. Turn cabinet power switch off.
20. After 30 seconds, turn cabinet power switch on.
21. Game will reboot and enter calibration mode.
22. Re-calibrate guns.
23. Settings will now be factory defaults – make changes as needed.
Terminator Salvation™ Copyright © 2010 T Asset Acquisition Company, LLC
Page 41
Содержание Terminator Salvation Super Deluxe
Страница 7: ...Service Manual Terminator Salvation Copyright 2010 T Asset Acquisition Company LLC Page 7 ...
Страница 45: ...Terminator Salvation Super Deluxe Terminator Salvation Copyright 2010 T Asset Acquisition Company LLC Page 45 ...
Страница 51: ...Service Manual Parts Guns Terminator Salvation Copyright 2010 T Asset Acquisition Company LLC Page 51 ...