PlayMechanix Terminator Salvation Super Deluxe Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 56

background image

Service Manual

Setup and Assembly

11. Press the Start button to return to the System Tests menu
12. Scroll to highlight the Gun Electronics Test.
13. Press the Start button to begin the test.
14. Squeeze the trigger to see additional test results.
15. Ensure the guns pass all tests.
16. Press the Start button to conclude the test and return to the System Tests menu.
17. Press the Start button again to return to the Main Menu.
18. Using the Diagnostic system, described later in this manual, run other diagnostics and make

desired adjustments.

Other Tests

See the Diagnostic Section for further information.

1. Enter the Switch Test menu and verify all switches function.
2. Enter the Screen Test menu and verify that video is acceptable.
3. Enter the Sound Test menu and verify the audio works and is not distorted.
4. Enter the Coin Meter Test menu and verify the operation of the coin meter.
5. Enter the Cabinet Lamps Test menu and verify that all cabinet lights work correctly.
6. Enter the Watchdog Test menu, which reboots the game.
7. Upon a successful reboot, you are ready to make adjustments to pricing, volume and other

functions found in the Adjustments section of Diagnostics.

Terminator Salvation™ Copyright © 2010 T Asset Acquisition Company, LLC

Page 23

«
...
21
22
23
24
25
...
»

Содержание Terminator Salvation Super Deluxe

























































Отзывы:

Нет отзывов

Похожие инструкции для Terminator Salvation Super Deluxe

Бренд: Unicum Страницы: 79

Shuffle Master Auto Roulette

Бренд: Fusion Страницы: 2

Бренд: Coastal Amusements Страницы: 5

Бренд: Coastal Amusements Страницы: 14

Бренд: Saeco Страницы: 56

Бренд: LAI Games Страницы: 51

Бренд: Atari Страницы: 97

San Francisco Rush 2049

Бренд: Atari Страницы: 106

Sonic Sports Air Hockey 2P

Бренд: Sega Страницы: 16

Бренд: Sega Страницы: 21

Бренд: Standard Horizon Страницы: 28

Бренд: Standard Horizon Страницы: 40

Бренд: Standard Horizon Страницы: 46

Бренд: Kogan Страницы: 12

Бренд: Atlantis Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды