PlayMechanix Terminator Salvation Super Deluxe Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 56

background image

Terminator Salvation™ Super Deluxe

Maintenance

Regular Gun Maintenance

Terminator Salvation™ is equipped with two state-of-the-art custom-designed gun controllers. In order to
maximize income potential, keep the guns in optimal working order by performing the following fivestep
procedure every time you empty the cash box.

1.

Check the camera lens

Observe the clear lens at the tip of the gun to ensure it has no cracks, scratches or dirt. Clean or
replace the lens, if necessary.

2.

Visually and manually inspect gun cable connections

Open the coin door to see them. Reach in and ensure the USB and data/power cables are fully
connected and are not pinched by any components.

3.

Verify switch functionality

Press the Test button on the service panel, select System Tests and then select Switch Test
(described earlier in this manual) to ensure all the gun switches are functioning properly.
Switches in the gun include: Trigger, Reload clip, Grenade

4.

Calibrate, calibrate, calibrate

Return to the Main Menu screen and select Gun Calibration. Follow the instructions earlier in this
manual or on screen to recalibrate both guns.

5.

Check the I/R sensors

The sensors are directly below and above the printed marquee on the monitor assembly.
From the Main Menu, select System Tests, then select Camera Test to ensure all the I/R sensors
are working. If any of the IR LEDs are not working, remove the corresponding I/R sensor covers
and check the I/R cables for breaks or bad connections. Recalibrate the guns any time the game
is moved or the guns are repaired, replaced or swapped.

Note: It is not advisable to replace or swap guns while power is on. Shut AC power off before connecting
or disconnecting any components. If, for some reason, guns are changed while power is on, shut off AC
power and reboot after the guns are connected again. Failure to do so may confuse the system so it does
not recognize the guns.

Following These Procedures Is Critical To

Maintaining Guns and Maximizing Revenue.

Perform regular gun maintenance to keep

your game in top working order.

Page 40

Terminator Salvation™ Game Software Copyright

© 2010 PlayMechanix™ Inc. All rights reserved.

«
...
38
39
40
41
42
...
»

Содержание Terminator Salvation Super Deluxe

























































Отзывы:

Нет отзывов

Похожие инструкции для Terminator Salvation Super Deluxe

Бренд: Hitachi Страницы: 32

Бренд: Hitachi Страницы: 48

Бренд: Hitachi Страницы: 148

Бренд: Hitachi Страницы: 220

Бренд: Hitachi Страницы: 16

796.3155 series

Бренд: Kenmore Страницы: 34

Бренд: Chicago Gaming Страницы: 12

Бренд: Merit Страницы: 2

Бренд: Merit Страницы: 3

Бренд: Merit Страницы: 3

Megatouch SLIM MAXX

Бренд: MERIT INDUSTRIES Страницы: 22

Megatouch FORCE 2002

Бренд: MERIT INDUSTRIES Страницы: 22

Бренд: I.C.E Страницы: 14

Бренд: Necta Vending Solutions SpA Страницы: 40

Бренд: Wittenborg Страницы: 12

Бренд: Wittenborg Страницы: 27

Бренд: Wittenborg Страницы: 88

Бренд: MecPower Tecway Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды