23
Note:
If the test is unable to determine a valid result, four dashes
“- - - -” appear in place of the measured cable length reading
and the “Error” message flashes (see Figure 9). The following
scenarios may result in an invalid result:
▪
The connected cable is terminated.
▪
Excess signal loss.
Figure 8.
LCD Display Screen in Test Mode
Figure 9.
Error in Test Mode
▪
The measured cable length in units of feet or meters.
▪
The storage location (M1 or M2) with its associated NVP value
used to calculate the connected cable’s length.
▪
The adjustment indicator icon appears in the lower left corner.
▪
The cable fault (Open or Short).
5. Interpret display results and trouble-shoot potential cable fault
(Open or Short).
