17
Note:
Single presses of the MEM button toggles between the two
memory storage locations.
Cable length does not update automatically when toggling
between the two memory storage locations. To achieve an
accurate length measurement when selecting a different stored
NVP value, a test must be run. Refer to the
Using Test Mode
section for instructions on measuring cable length.
Figure 4.
LCD Display Screen in Memory Storage
Recalling Stored NVP Values
1. Connect one end of the cable to the Snap Shot™. Use connection
accessories according to the type of cable you are testing.
2. Press the POWER button to turn the unit ON.
3. Press the MEM button to recall the stored NVP Value. The LCD
display screen, illustrated in Figure 4 below, shows the following:
▪
The current storage location (M1 or M2) and the NVP value last
saved in the selected location.
▪
The adjustment indicator icon appears in the screen indicating
NVP is editable.
▪
The cable length calculated during the last test.
