Installing the Top Shelving (all models)
• Carefully work your way around the perimeter of the
pool, positioning your top shelving. Take your time
to get the overhang even on all sides. Please note
that the bevelled mitres indicate the top side of the
shelving.
• Once you are satisfied with the position, use the
screws provided to fix the top shelving in place. For
best results use a countersink drill bit to achieve a
flush finish.
• Generally one screw should be fixed into the top of
the pool wall and a second screw into the shelving
support/bracket at each fixing point.
• If you are installing an 8ft model please use the
50mm screws provided to fix the top shelving down.
Fixing the Skimmer to the Wall (10ft models only)
• Pre-drill the skimmer in the four corners. Use the
3.5mm x 20mm panhead screws provided in the
fixing kit and fix the skimmer into place as shown.
– 10 –