Plasson PFS Monomatic, Инструкция по эксплуатации

Страница: 58 / 68

58 EN001 H01
12.6.14 Secure data*
If this option is activated you will not be prompted after printing reports (USB or printer) to delete the printed
reports. This prevents deletion by unauthorised personnel.
Step Action
1 Accessing the "Secure data" option
1.1
Select the entry "Secure data" in the system configuration, using the ▲
-
and ▼
-buttons.
2 Changing the "Secure data" option
2.1
The ◄ ► buttons are used to move the marking (*) from the "activated" (+) column to the
„deactivated“ (-) column and vice versa.
2.2 After having this option changed in the system configuration press the green start button to accept
the change and acknowledge the following safety prompt "Are you sure?"by again pressing the
green start button.
You can abort the input by pressing the red stop button.
Attention!
If "Code Lock" is active when "Secure data" is activated, "Code Sys." and "Code Del." will be
activated automatically.
This ensures, that reports can only be deleted from the memory of the electrofusion control unit if
an unlocking- resp. supervisor code is entered beforehand. Additionally "Code Sys." prevents
access to the system configuration without an unlocking- resp. supervisor code.
*) Only with electrofusion control units that have data recording capability.
12.6.15 BT on***
If this option is activated, the electrofusion control unit can be detected by other devices via Bluetooth.
Pairing with a smartphone or tablet that runs Android or iOS and is connected to the internet is now possible.
After successful pairing you can control the electrofusion control unit by using the PFS app.
Attention!
Without prior registration, the connection to the electrofusion control unit will not be possible.
Step Action
1 Accessing the "BT on" option
1.1
Select the entry "BT on" in the system configuration, using the ▲
-
and ▼
-buttons.
2 Changing the "BT on" option
2.1
The ◄ ► buttons are used to move the marking (*) from the "activated" (+) column to the
„deactivated“ (-) column and vice versa.
2.2 After having this option changed in the system configuration press the green start button to accept
the change and acknowledge the following safety prompt "Are you sure?"by again pressing the
green start button.
You can abort the input by pressing the red stop button.
***) Only with electrofusion control units that have Bluetooth functionality.