Plasson PFS Monomatic, Инструкция по эксплуатации

Страница: 47 / 68

EN001 H01 47
12.6 System config.
Different variants of the electrofusion control unit
This instruction manual describes several different variants of the electrofusion control unit. These
variants differ in the range of available functions and in the number of menu entries. The
differences are pointed out where necessary. Please check which variant you have.
In the menu "System config."different settings and functions of the electrofusion control unit can be changed.
Depending on the basic configuration of the device, it is possible that an unlocking- resp. supervisor code is
required to gain access to this menu. This restriction can be deactivated in this menu.
Step Action
1 Accessing the system configuration
1.1
Select the entry "System configuration" in the function menu, using the ▲
-
and ▼
-buttons.
Function menu
1.2 Press the enter button to access the system configuration.
2 The system configuration
System config.
< This symbol is the selection indicator that marks the currently
selected menu item.
▲▼
These buttons move the selection indicator up and down.
Enter button The enter button selects the function marked by the selection
indicator <.
* The star shows the status of the option. If the star is in the + row,
the respective option is activated. If the star is in the - row, the
respective option is deactivated.
◄ ►
Pressing these buttons changes the option status (ON/OFF).
Green start button Pressing the green start button accepts/saves the values and
returns to the main display.
Red stop button Pressing the red stop button cancels and returns to the main
display.
Contrast
>System config.
+ -
Language DE <
Inv. number
Set clock *