Plasson PFS Monomatic, Инструкция по эксплуатации

Страница: 55 / 68

EN001 H01 55
12.6.11 Code Lock
When activating this function the controller checks, if already activated locking functions (depending of the
type of controller "Code Sys.", "Code Man.", "Code Del." and "Secure Data") are sufficient to ensure, that
their deactivation can only be done after entering an unlocking- or supervisor code to access the system
configuration. That way an efficient security measure can be set to prevent, that locking functions can be
easily deactivated (bypassed) in the system configuration.
If "Code Lock" is deactivated, the electrofusion control unit can be freely configured to your liking. It is then
possible that, for example, "Code Man." can be activated without locking the system configuration by
activating "Code Sys." as well.
Attention!
This option can be preset, depending on the device type. Contact your retailer or the manufacturer
of the electrofusion control unit before activating this option.
In any case you will need an unlocking- or supervisor code for accessing the locked functions if this
option is activated and "Code Sys." is also active.
Step Action
1 Accessing the "Code Lock" option
1.1
Select the entry "Code Sys" in the system configuration, using the ▲
-
and ▼
-buttons.
2 Changing the "Code Lock" option
2.1
The ◄ ► buttons are used to move the marking (*) from the "activated" (+) column to the
„deactivated“ (-) column and vice versa.
2.2 Please note, that when activating this option, independently from other options that may already
be active, "Code Sys." will automatically also be activated. This prevents, bypassing and
deactivating of locking functions in the system configuration without an unlocking- or supervisor
code.
2.3 After having this option changed in the system configuration press the green start button to accept
the change and acknowledge the following safety prompt "Are you sure?"by again pressing the
green start button.
You can abort the input by pressing the red stop button.