Plantronics DISCOVERY 640X -, Руководство пользователя

Страница: 16 / 35

0 1
UsinG VoicE actiVatED DiallinG
NOTE: To use voice activated dialling, the voice activated dialling feature must be enabled on your device. See
your Bluetooth device manual for instructions. With the headset on, one long press on the call control button
activates the voice activated dialling feature on the headset.
MUltiPlE UsEs oF a lonG PrEss on tHE call
control BUtton
HEADSET FUNCTION
STATE OF THE
Bluetooth DEVICE
RESULT
Turn on power Power off Turns the power on
Re-link to
Bluetooth device
Power on
Link dropped
Re-links the device
Reject call
Power on
Linked
Incoming call
Disconnects the call or sends the call to
voice mail depending on your device
Transfer a call between
Headset and Bluetooth device
Power on
Linked
On a call
Transfers the call from
one device to another
Voice activated dialling
Power on
Linked
No call
Activates the voice recognition feature
ansWErinG anD
EnDinG calls
1. To answer a call, briefly press the call control button or the
volume/mute button.
2. To answer or end a call, press the call control button.
If the headset is in the headset carrying pocket when a call is
received, the carrying pocket will vibrate. Removing the
headset from the pocket will answer the call.
Returning the headset to the headset carrying pocket will end
the call.
aDJUstinG tHE VolUME
To increase the listening volume of the headset, press the upper
end (+) of the volume/mute button.
To decrease the listening volume, press the lower end (-).
WARNING: Do not use headphones/headsets at high volumes
for an extended period of time. Doing so can cause hearing
loss. Always listen at moderate levels.
last nUMBEr rEDial
To activate last number redial, double click the call control
button. You will hear a high tone for each key press.
NOTE: Last number redial must be supported by your device or
mobile phone provider.
UsinG tHE MUtE
To turn the mute on whilst on a call, press both sides of the
volume/mute button simultaneously until you hear a beep.
To turn the mute off, press both buttons again.
MoVinG oUt oF ranGE
As the headset is moved away from the mobile phone or
Bluetooth device, the following could occur:
• Audio quality will degrade.
• A beep will be heard in the headset.
• Only the power off function will operate.
After 30 seconds, the headset will make one attempt to
reconnect to the phone or device.
gB Using yOUr HEadsET
HEADSET STATUS HEADSET STATUS INDICATOR
Powering on Blue light appears and flashes every 6 seconds
Power on Blue light flashes every 6 seconds
Powering off Red light appears and goes off
Power off Indicator is not lit
Charging battery Red light is on
Battery fully charged Red light is off
Discovery state Indicator flashes blue and red for 30 seconds
Missed call
Infrequent flashing blue/red
Press any button to cancel
Ringing Rapid flashing blue/red
On Line Indicator (OLI) Blue flash every 10 seconds
Low battery Flashes red
statUs inDicators