Planmeca Proline XC Panoramic, Руководство по калибровке, Страница: 3 / 58

- 3 -
Table of Contents
Chapter A: General Information
1. Disclaimer 5
2. Required Tools 7
2.1. Calibration Tools 7
2.1.a. Digital Panoramic 7
2.1.b. Digital Cephalometric 8
2.2. Hand Tools 9
Chapter B: Panoramic
1. Beam Alignment 11
1.1. Collimator 0 13
1.1.a. High / Low 14
1.1.b. Left / Right 14
1.1.c. Angled 15
1.2. Collimator 1 16
1.2.a. Left / Right 16
2. Beam Check 17
2.1. Connecting to the computer 17
2.1.a. Network Interface Box connections 18
2.1.b. Didapi Configuration 18
2.2 Setting up Beam Check 18
2.3 Beam Check on the computer 20
3. Calibrating 21
3.1 Setting up the computer 21
3.1.a Dimax3 Tool 21
3.1.b Turning radiation Off/On 22
3.1.b.i OFF 22
3.1.b.ii ON 22
3.1.c kV/mA settings for Panoramic 23
3.1.d Changing Binnings 23
4. Ball Phantom 24
4.1. Setting up the touch screen 24
4.2. Dimaxis Pro 4.x.x 27
4.3 Checking Image 28
4.3.a Center Ball 28
4.3.a.i Too Thin 29
4.3.a.ii Too Fat 29
4.3.b 10
th
Ball 30
4.3.b.i Too Left 30
4.2.b.ii Too Right 31
4.2.b.iii Moving the Table 31
4.3.c Shadow Ball 32
4.3.c.i Too Left/ Too Right 32
4.4 Patient Positioning Light Alignment 33
4.4.a Midsaggital Light Beam 36
4.4.b Frankfort Light Beam 36
4.4.c Focal Layer Light Beam 37