background image

Copyright Planika Sp. z o.o.  

www.planikafires.com 

 

 

 

 

 

 

I.

 

General information 

PrimeFire 

is  not  a  heating  device,  but  modern  decorative  device  that  uses  the  beauty  of  a  real  flame.  Due  to  the  innovative 

technology operation of 

PrimeFire

 is simple and safe. 

II.

 

Fuel 

To ensure the safety of the device it has to be refilled with recommended FANOLA® liquid or other in accordance with European 
Union  directive  N.162/2013  for  86-96,6%  ethanol  with  contaminators  regarding  density,  viscosity  and  electrical  conductivity. 
These properties must be identical to the properties of recommended FANOLA® liquid. For more information please contact the 
manufacturer. 

Use of any other fuel is strictly forbidden, as it may lead to improper operation of the device, damages and hazard to health and 
safety  of  its  operators.  Manufacturer  will  not  accept  any  responsibility  in  case  of  using  any  other  fuel  than  recommended  
(i.e dehydrator and/or super  purified ethanol  with more than 96,6%  ethanol volume) or any other which doesn’t meet above 
mentioned properties.

  

Explanation of symbols is placed on the placed on the flap of the device: 

 

It is forbidden to pour fuel into a burning device! 

 
 
 
It is forbidden to pour fuel into a hot device! 
 
 

FANOLA ® - additional information: 

Warning symbols: 

H225: Highly flammable liquid and vapors 
H319: May be skin irritant 
H336 - The substance can cause sleepiness, dizziness 

Warning markings: 

R-11 - Highly flammable liquid 

Operational notes: 

S-2 – Store beyond children's reach 
S-7 - Keep container tightly closed 
S-16 - Keep away from sources of ignition - No smoking 
S-46 – In case of ingestion immediately seek medical advice – show the package or label 

 
 

 

This mark stands for information which one needs to acquaint with. 

 

 

This mark stands for warnings which one needs to acquaint with. 

 

!

Содержание PrimeFire#4 Logs











Отзывы: