Planex BLW-54PM Скачать руководство пользователя

Страница: 22 / 67

SSID

•

If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identi-
fier).

•

To communicate, all Wireless stations should use the same
SSID/ESSID.

Options

Mode

Select the desired mode:

•

g & b

- Both 802.11.g and 802.11b Wireless stations will be able

to use the BLW-54PM.

•

g only

- Only 802.11g Wireless stations can use the BLW-54PM.

•

b only

- Only 802.11b connections are available. 802.11g Wire-

less Stations will only be able to use the BLW-54PM if they are
fully backward-compatible with the 802.11b standard.

Channel No.

This selection determines which operating frequency will be used. The
channel list changes according to the selected region.

Select the desired channel. Adjacent Access Points should use different
channels to avoid interference.

AutoLink

Auto Link is a new feature integrated in PLANEX GW-NS54GMZ
that offers users a simple way to configure a BLW-54PM in conjunc-
tion with the Configuration Utility.

Broadcast SSID

If Enabled, the SSID will broadcast its name to all Wireless Stations.
Stations which have no SSID (or a

null

value) can then adopt the

correct SSID for connections to this Access Point.

Current Setting

•

Status

- This will display

Off

64 Bit Encryption

128 Bit En-

cryption

WPA-PSK

•

Configure

- Click this button to access the Wireless Security sub-

screen.

Access Point

Enable Access
Point

•

If Enabled, wireless stations will be able to locate and use this
Access Point.

•

If Disabled, the wireless interface is disabled, and will neither
transmit nor receive wireless traffic.

•

The Wireless (WLAN) LED on the front panel will remain OFF if
the Wireless interface is disabled.

Allow LAN
access by …

•

All Wireless Stations

- All wireless stations can use the access

point to access your LAN.

•

Selected Wireless stations only

- Only selected wireless stations

access your LAN. To select the required wireless stations, click
the

Select Stations

button.

Allow Internet
access by …

•

All Wireless Stations

- All wireless stations can use the access

point to access the Internet.

•

Selected Wireless stations only

- Only selected wireless stations

use the access point to access the Internet. To select the required
wireless stations, click the

Select Stations

button.

Buttons

Configure

Click this button to view the Wireless Security sub-screen.

Содержание BLW-54PM




































































Результаты поиска

Содержание BLW-54PM

Отзывы:

Похожие инструкции для BLW-54PM

Бренды по названию

Популярные бренды

Planex BLW-54PM, Руководство пользователя

Результаты поиска

Содержание BLW-54PM

Отзывы:

Похожие инструкции для BLW-54PM

Бренды по названию

Популярные бренды