Buttons
Defaults
This will delete any Servers you have defined, and set the pre-
defined Servers to use their default port numbers.
Disable All
This will cause the
Enable
setting of all Virtual Servers to be set
OFF.
Update Selected
Server
Update the current Virtual Server entry, using the data shown in the
Properties
area on screen.
Add as new Server
Add a new entry to the Virtual Server list, using the data shown in
the
Properties
area on screen. The entry selected in the list is
ignored, and has no effect.
Delete
Delete the current Virtual Server entry. Note that the pre-defined
Servers can not be deleted. Only Servers you have defined yourself
can be deleted.
Clear Form
Clear all data from the
Properties
area, ready for input of a new
Virtual Server entry.
Note:
For each entry, the PC must be running the appropriate Server software.
4.5.3 Defining your own Virtual Servers
If the type of Server you wish to use is not listed on the
Virtual Servers
screen, you can
define and manage your own Servers:
Create a new Server:
1.
Click
Clear Form
2.
Enter the required data, as described above.
3.
Click
Add
.
4.
The new Server will now appear in the list.
Modify (Edit) a Server:
1.
Select the desired Server from the list
2.
Make any desired changes (for example, change the
Enable/Disable setting).
3.
Click
Update
to save changes to the selected Server.
Delete a Server:
1.
Select the entry from the list.
2.
Click
Delete
.
Note:
You can only delete Servers you have defined. Pre-
defined Server cannot be deleted.
Note:
From the Internet, ALL Virtual Servers have the IP Address allocated by your ISP.
42
