Planex BLW-54PM Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 67

background image

6.3 Safety Statement

CE Statements

This device has bee tested and found to comply with the requirements set up
in the council directive on the approximation of the law of member states
relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and
R&TTE Directive 99/5/EC.

FCC Safety Statements

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
1.

This device may not cause harmful interference.

2.

This device must accept m\any interference received, including interference

that may cause undesired operation.

The radiated output power is far below the FCC Radio frequency exposure limits.
Nevertheless, this device should be used in such a manner that the potential for
human contact during normal operation is minimized.

Warning: Change or modifications made to this equipment not expressly
approved by the manufacturer. May void the FCC authorization to operate this
equipment.

Important

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

67

«
...
65
66
67

Содержание BLW-54PM




































































Отзывы:

Нет отзывов

Похожие инструкции для BLW-54PM

Бренд: Malmbergs Страницы: 6

Бренд: Ebyte Страницы: 16

8760 - Wireless Dual Radio 11a/b/g PoE Access...

Бренд: 3Com Страницы: 8

Бренд: HiTi Digital Страницы: 26

Бренд: Digisol Страницы: 29

Harman Endurance Peak 3

Бренд: JBL Страницы: 17

Harman Reflect Aero TWS

Бренд: JBL Страницы: 21

AirPrime BX3100

Бренд: Sierra Wireless Страницы: 33

Бренд: Air Live Страницы: 50

Бренд: Blackweb Страницы: 2

Бренд: ConnectGear Страницы: 11

Бренд: ConnectGear Страницы: 36

Бренд: Packedge Страницы: 16

Conduit AP MTCAP LSP3-915-001L

Бренд: Multitech Страницы: 32

CRUSHER VRA S6MBW

Бренд: Skullcandy Страницы: 33

Cinterion ENS22-E

Бренд: Gemalto Страницы: 189

Бренд: TECOM Страницы: 17

Бренд: AMX Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды