Planet WNAP-W2201A, Руководство пользователя

Страница: 50 / 116

User Manual of WNAP-W2201A
-41-
 2.4 GHz (G) : 802.11g mode, rate is up to 54Mbps
 2.4 GHz (N) : 802.11n mode, rate is up to 300Mbps(2T2R)
 2.4 GHz (B+G) : 802.11b/g mode, rate is up to 11Mbps or 54Mbps
 2.4 GHz (G+N) : 802.11g/n mode, rate is up to 54Mbps or 300Mbps
 2.4 GHz (B+G+N) : 802.11b/g/n mode, rate is up to 11Mbps,
54Mbps, or 300Mbps
Mode There are four kinds of wireless mode selections:
 AP
 Client
 WDS
 Repeater
If you select WDS or Repeater, please click “ WDS Settings ” in the
submenu for the related configuration. Furthermore, click “ Multiple
AP” to enable multiple SSID function.
Channel Width You can select 20MHz , or 40MHz
Control Sideband You can select Upper or Lower .
Channel Number You can select the operating frequency of wireless network.
Data Rate Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically,
it’s not necessary to change this value
unless you know what will happen after modification.
Default is “ Auto” .
Once you have applied and saved the settings of WDS mode, you can then go to the “ WLAN  WDS
Settings ” page on the AP to set up the MAC address of the remote slave AP.
 Repeater
Connect this Wireless AP with up to 8 WDS-capable wireless APs, and connect another AP to provide
service for all wireless stations within its coverage.