Note:
You need to give your LAN PC clients a fixed/static IP address for the
Access Control rule to work properly.
Client PC Service
You can block the clients from accessing some Internet services by checking
the services you want to block.
Protocol
This allows you to select
UDP
,
TCP
or
Both
protocol types.
Port Range
You can assign up to five port ranges. The router will block clients from
accessing Internet services that use these ports.
Add
Click “Add” to save the settings.
Reset
Click “Reset” to clear all fields.
After configuration complete, please click “Apply”
button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press “Continue” for configure other
settings or “Apply” to restart WMRT-414 with new configuration.
5.7.2 URL
Blocking
You can block users to access to some web sites by entering a full URL address or just keyword of the
web site.
- 55 -
Parameters
Description
Enable URL Blocking
Enable/disable URL Blocking.
Add URL / Keyword
Fill in “URL / Keyword” and then click “Add”. You can enter the full URL
address or the keyword of the web site you want to block. If you find any typo
before adding it and want to retype again, just click "Reset" and the field will
