background image

Federal Communication Commission (FCC) Radiation Exposure 
Statement 

This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In 

order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity 

to the antenna shall not be less than 20 cm(8 inches) during normal operation. 

R&TTE Compliance Statement 

This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN 

PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication 

terminal Equipment and the mutual recognition of their conformity (R&TTE) 

The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal 

Equipment and Satellite Earth Station Equipment) As of April 8,2000. 

Safety 

This equipment is designed with the utmost care for the safety of those who install and use it. However, 

special attention must be paid to the dangers of electric shock and static electricity when working with 

electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed 

at all times to ensure the safe use of the equipment. 

WEEE regulation 

To avoid the potential effects on the environment and human health as a result of the 

presence of hazardous substances in electrical and electronic equipment, end users of 

electrical and electronic equipment should understand the meaning of the crossed-out 

wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to 

collect such WEEE separately.   

 

Revision 

User’s Manual for PLANET 802.11g Wireless MIMO Router 

Model: WMRT-414 

Rev: 1.0 (December. 2005) 

Part No. EM-WMRT414 

 

 

Содержание WMRT-414



























































































Отзывы: