5.4.3.1 WEP
When you select 64-bit or 128-bit WEP key, you have to enter WEP keys to encrypt data. You can
generate the key by yourself. You can enter four WEP keys and select one of them as default key.
Then the access point will just allow the clients that with the same encryption keys connected. You
can use WEP encryption in “AP mode”, “Station-Ad Hoc mode”, “Station-Infrastructure mode” and
“AP Bridge-WDS mode”.
If you would like to enable 802.1x Authentication also, please check the “Enable 802.1x Authentication”
and refer to section 5.4.3.2 for the detail of 802.1x settings.
- 36 -
