Planet WGSW-20160HP Скачать руководство пользователя страница 51

Страница: 51 / 555

User’s Manual of WGSW-20160HP

4.2.1 System Information

The System Infomation Page provides information for the current device information. System Information Page helps a switch

administrator to identify the hardware MAC address, software version and system uptime. The screen in

Figure 4-2-1

appears.

Figure 4-2-1:

System Information Page Screenshot

The Page includes the following fields:

Object

Description



Contact

The system contact configured in Configuration | System | Information | System Contact.



Name

The system name configured in Configuration | System | Information | System Name.



Location

The system location configured in Configuration | System | Information | System

Location.



MAC Address

The MAC Address of this Managed Switch.



Temperature

Indicate main chipset temperature.



System Date

The current (GMT) system time and date. The system time is obtained through the

configured SNTP Server, if any.



System Uptime

The period of time the device has been operational.



Software Version

The software version of the Managed Switch.



Software Date

The date when the Managed Switch software was produced.

Buttons

Auto-refresh

: Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.

: Click to refresh the Page; any changes made locally will be undone.

Содержание WGSW-20160HP












































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSW-20160HP

Отзывы:

Похожие инструкции для WGSW-20160HP

Бренды по названию

Популярные бренды

Planet WGSW-20160HP, Руководство пользователя

Результаты поиска

Содержание WGSW-20160HP

Отзывы:

Похожие инструкции для WGSW-20160HP

Бренды по названию

Популярные бренды