Planet WGSW-20160HP Скачать руководство пользователя страница 241

Страница: 241 / 555

User’s Manual of WGSW-20160HP

241

The Page includes the following fields:

Object

Description

The switch port number. Click to navigate to detailed NAS statistics for this port.



Port

The port's current administrative state. Refer to NAS Admin State for a

description of possible values.



Admin State

The current state of the port. Refer to NAS Port State for a description of the

individual states.



Port State

The source MAC address carried in the most recently received EAPOL frame for

EAPOL-based authentication, and the most recently received frame from a new

client for MAC-based authentication.



Last Source

The user name (supplicant identity) carried in the most recently received

Response Identity EAPOL frame for EAPOL-based authentication, and the

source MAC address from the most recently received frame from a new client for

MAC-based authentication.



Last ID

QoS Class assigned to the port by the RADIUS server if enabled.



QoS Class

The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID

is not overridden by NAS.

If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is

appended to the VLAN ID. Read more about RADIUS-assigned VLANs here.

If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID.

Содержание WGSW-20160HP












































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSW-20160HP

Отзывы:

Похожие инструкции для WGSW-20160HP

Бренды по названию

Популярные бренды

Planet WGSW-20160HP, Руководство пользователя

Результаты поиска

Содержание WGSW-20160HP

Отзывы:

Похожие инструкции для WGSW-20160HP

Бренды по названию

Популярные бренды