Planet WGSD-1022, Руководство пользователя

Страница: 171 / 382

User’s Manual of WGSD-1022/WGSD-8000
- 171 –
bridge multicast address
{
mac-multicast-address
|
ip-multicast-address
} [
add
|
remove
] {
ethernet interface-list | port-channel
port-channel-number-list
}
no bridge multicast address
{
mac-multicast-address
|
ip-multicast-address
}
ƒ
add
— Adds ports to the group. If no option is specified, this is the default option.
ƒ
remove
— Removes ports from the group.
ƒ
mac-multicast-address
— MAC multicast address.
ƒ
ip- multicast-address
— IP multicast address.
ƒ
interface-list
— Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a
range of ports.
ƒ
port-channel-number-list
— Separate nonconsecutive port-channels with a comma and no spaces; a hyphen is used to
designate a range of ports.
Default Configuration
No multicast addresses are defined.
Command Mode
Interface configuration (VLAN) mode
User Guidelines
If the command is executed without
add
or
remove
, the command only registers the group in the bridge database. Static
multicast addresses can only be defined on static VLANs.
Examples
The following example registers the MAC address:
console (config)#
interface vlan
8
console (config-if)#
bridge multicast address
0100.5e02.0203
The following example registers the MAC address and adds ports statically.
console (config)#
interface vlan
8
console (config-if)#
bridge multicast address
0100.5e02.0203
add Ethernet
g1-9
5.4.4 bridge multicast forbidden address
The
bridge multicast forbidden address
interface configuration command forbids adding a specific multicast address to
specific ports.
Syntax
bridge multicast forbidden address
{
mac-multicast-address
|
ip-multicast-address
} {
add
|
remove
} {
Ethernet interface-list |
port-channel port-channel-number-list
}