Planet WGSD-1022 Скачать руководство пользователя страница 375

Страница: 375 / 382

User’s Manual of WGSD-1022/WGSD-8000

- 375 –

Authenticator.

EapolStartFramesRx

The number of EAPOL Start frames that have been received by this Authenticator.

EapolLogoffFramesRx

The number of EAPOL Logoff frames that have been received by this Authenticator.

EapolRespIdFramesRx

The number of EAP Resp/Id frames that have been received by this Authenticator.

EapolRespFramesRx

The number of valid EAP Response frames (other than Resp/Id frames) that have
been received by this Authenticator.

EapolReqIdFramesTx

The number of EAP Req/Id frames that have been transmitted by this Authenticator.

EapolReqFramesTx

The number of EAP Request frames (other than Rq/Id frames) that have been
transmitted by this Authenticator.

InvalidEapolFramesRx

The number of EAPOL frames that have been received by this Authenticator in which
the frame type is not recognized.

EapLengthErrorFramesRx

The number of EAPOL frames that have been received by this Authenticator in which
the Packet Body Length field is invalid.

LastEapolFrameVersion The

protocol version number carried in the most recently received EAPOL frame.

LastEapolFrameSource

The source MAC address carried carried in the most recently received EAPOL frame.

5.29.15 dot1x auth-not-req

The

dot1x auth-not-req

interface VLAN configuration command enables unauthorized users access to that VLAN. Use the

form of this command to disable the access.

Syntax

dot1x auth-not-req

no dot1x auth-not-req

This command has no arguments or keywords.

Default Configuration

User should be authorized to access the VLAN.

Command Mode

Interface configuration (VLAN) mode

User Guidelines

To define a VLAN for authorized and unauthorized users use the

dot1x auth-not-req

interface VLAN command.

Examples

The following example enables unauthorized users access to the VLAN.

Содержание WGSD-1022































































































































































































































































































































































































Результаты поиска

Содержание WGSD-1022

Отзывы:

Похожие инструкции для WGSD-1022

Бренды по названию

Популярные бренды

Planet WGSD-1022, Руководство пользователя

Результаты поиска

Содержание WGSD-1022

Отзывы:

Похожие инструкции для WGSD-1022

Бренды по названию

Популярные бренды