User’s Manual of WGSD-1022/WGSD-8000
- 355 –
5.27.17 switchport general map protocols-group vlan
The
switchport general map protocols-group vlan
interface configuration command sets a protocol-based classification rule.
To delete a classification, use the
no
form of this command.
Syntax
switchport general map protocols-group group vlan vlan-id
no switchport general map protocols-group group
group
— Group number as defined in the
map protocol protocols-group
command. (Range: 1 - 2147483647)
vlan-id
— Define the VLAN ID in the classifying rule.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a protocol-based classification rule of protocol group 1 to VLAN 8.
Console (config)#
interface ethernet
e8
Console (config-if)#
switchport general map protocols-group
1
vlan
8
5.27.18 ip internal-usage-vlan
The
ip internal-usage-vlan
interface configuration command reserves a VLAN as the internal usage VLAN of an interface. Use
the
no
form of this command to reset to default.
Syntax
ip internal-usage-vlan vlan-id
no ip internal-usage-vlan
vlan-id —
VLAN ID of the internal usage VLAN.(Range: Valid VLAN)
Default Configuration
This command has no default configuration.
Содержание WGSD-1022
Страница 136: ...User s Manual of WGSD 1022 WGSD 8000 136 ...
Страница 152: ...User s Manual of WGSD 1022 WGSD 8000 152 Figure 4 82 Flash Logs screen ...
Страница 200: ...User s Manual of WGSD 1022 WGSD 8000 200 ...