User’s Manual of WGSD-1022/WGSD-8000
- 87 –
4.7.6 Multiple Hosts
The Multiple Hosts screen (see figure 4-33) allows network managers to configure advanced port-based authentication settings
for specific ports and VLANs.
Figure 4-33
Multiple Hosts screen
The Page contains the following fields:
•
Port
Displays the port number for which advanced port-based authentication is enabled.
•
Enable Multiple
Hosts
When checked, indicates that multiple hosts are enabled. Multiple hosts must be
enabled in order to either disable the ingress-filter, or to use port-lock security on
the selected port.
•
Action on Violation
This defines the action to be applied to packets arriving in single-host mode, from a
host whose MAC address is not the supplicant MAC address. The possible field
values are:
•
Discard
, which discards the packets. This is the default value.
•
Forward
, by which forwards the packet.
•
Discard Disable
, discards the packets and shuts down the port. The ports
remains shut down until reactivated, or until the device is reset.
•
Enable Traps
When checked, indicates that traps are enabled for Multiple Hosts
•
Trap Frequency
Defines the time period by which traps are sent to the host. The Trap Frequency
(1-1000000) field can be defined only if multiple hosts are disabled.
The default is
10
seconds.
Содержание WGSD-1022
Страница 136: ...User s Manual of WGSD 1022 WGSD 8000 136 ...
Страница 152: ...User s Manual of WGSD 1022 WGSD 8000 152 Figure 4 82 Flash Logs screen ...
Страница 200: ...User s Manual of WGSD 1022 WGSD 8000 200 ...
