User’s Manual of WGR-500-4P and WGR-500-4PV
69
Object
Description
Enable QoS
Check the box to enable the QoS function.
Automatic Uplink Speed
Check the box to adjust the uplink speed automatically by the Industrial
wall-mount Gigabit router. Or enter the uplink data rate manually in the field
below.
Automatic Downlink Speed
Check the box to adjust the downlink speed automatically by the Industrial
wall-mount Gigabit router. Or enter the downlink data rate manually in the
field below.
Name
Add a QoS rule name.
QoS Type
Choose type of QoS either by IPv4, MAC Address, IPv6, PHYPORT or
DSCP.
Protocol
Select type of protocol to use for QoS. It can be either TCP, UDP or both.
Select IP
Select connected client IP Address.
Local IP Address
Enter local IP Address range of client or device (if QoS type is IPv4).
Local Port
Enter local port range of client or device (if QoS type is IPv4).
Remote IP Address
Enter remote IP Address range of client or device (if QoS type is IPv4).
Remote Port
Enter remote port range of client or device (if QoS type is IPv4).
IPv6 Address
Enter IPv6 Address of client or device (if QoS type is IPv6).
MAC Address
Enter MAC Address of client or device (if QoS type is MAC).
PHYPORT
Enter Physical Ethernet port of connected client or device (if QoS type is
PHYPORT).
DSCP
Enter DSCP number of client or device (if QoS type is DSCP).
Mode
Select QoS mode for “Guaranteed minimum bandwidth” or “Restricted
maximum bandwidth”.
Uplink Bandwidth
Enter value of upload limitation value according to the QoS mode.
Downlink Bandwidth
Enter value of download limitation value according to the QoS mode.
remark dscp
Insert a remark on DSCP configuration.
Comment
Insert comment of the DSCP configuration as references.
