User’s Manual of WGR-500-4P and WGR-500-4PV
55
4.3.2 LAN Setup
This page is used to configure the parameters for local area network which connects to the LAN port of your
industrial wall-mount Gigabit router as shown in
Figure 4-27
. Here you may change the setting for IP address,
subnet mask, DHCP, etc...
Figure 4-27:
LAN Setup
Object
Description
IP Address
The LAN IP address of the Industrial wall-mount Gigabit router and default is
192.168.1.1
. You can change it according to your request.
Subnet Mask
Default is
255.255.255.0
. You can change it according to your request.
Default Gateway
Default is
192.168.1.254
. You can change it according to your request.
DHCP
You can select one of
Disable
,
Client
,
and Server
. Default is
Server,
that
the Industrial wall-mount Gigabit router can assign IP addresses to the
computers automatically.
DHCP Client Range
For the
Server
mode, you must enter the DHCP client IP address range in
the field. And you can click the “
Show Client
” button to show the Active
DHCP Client Table.
Domain Name
Default is Planet.
802.1d Spanning Tree
You can enable or disable the spanning tree function.
Clone MAC Address
You can input a MAC address here for using clone function.
If you change the device’s LAN IP address, you must enter the new one in your browser to
get back to the web-based configuration utility. And LAN PCs’ gateway must be set to this
new IP for successful Internet connection.