Planet MH-3400 Скачать руководство пользователя страница 96

Страница: 96 / 156

Gigabit Multi-Homing VPN Security Router User’s Manual

Item

Description

Tunnel No.

Set the embedded VPN feature, please select the Tunnel number.

Tunnel Name

Displays the current VPN tunnel connection name, such as XXX Office. Users are

well-advised to give them different names to avoid confusion.

Note

If this tunnel is to be connected to the other VPN device, some device

requires that the tunnel name is identical to the name of the host end

to facilitate verification. This tunnel can thus be successfully enabled.

Interface

From the pull-down menu, users can select the Interface for this VPN tunnel.

Enabled

Click to activate the VPN tunnel. This option is set to activate by default.

Afterwards, users may select to activate this tunnel feature.

Local VPN Group Setting

This Local Security Gateway Type must be identical with that of the remote type (Remote Security Gateway

Type).

Item

Description

Local Security

This local gateway authentication type comes with five operation modes, which are:

Gateway Type

IP only IP + Domain Name (FQDN) Authentication

IP + E-mail Addr. (USER FQDN) Authentication Dynamic IP + Domain Name (FQDN)

Authentication Dynamic IP + E-mail Addr. (USER FQDN) Authentication. Dynamic IP

a Email address name

(1) IP only:

If users decide to use IP only, entering the IP address is the only way to gain access to

this tunnel. The WAN IP address will be automatically filled into this space. Users don't

need to do further settings.

(2) IP + Domain Name(FQDN) Authentication:

If users select IP + domain name type, please enter the domain name and IP address.

The WAN IP address will be automatically filled into this space. Users don't need to do

- 90 -

Содержание MH-3400





























































































































































Результаты поиска

Содержание MH-3400

Отзывы:

Похожие инструкции для MH-3400

Бренды по названию

Популярные бренды

Planet MH-3400, Руководство пользователя

Результаты поиска

Содержание MH-3400

Отзывы:

Похожие инструкции для MH-3400

Бренды по названию

Популярные бренды