Planet MH-3400 Скачать руководство пользователя страница 37

Страница: 37 / 156

Gigabit Multi-Homing VPN Security Router User’s Manual

DNS Server

Input the DNS IP address set by ISP. At least one IP group should be input.

The maximum acceptable is two IP groups.

Internal LAN IP Range

Input the available IP range issued by ISP. If ISP issued two discontinuous IP

address ranges, users can input them into Internal LAN IP Range 1 and

Internal LAN IP Range 2 respectively.

Enable Line-Dropped

Scheduling

The WAN disconnection schedule will be activated by checking this option. In

some areas, there is a time limitation for WAN connection service. For

example: the optical fiber service will be disconnected from 0:00 am to 6:00 am.

Although there is a standby system in the device, at the moment of WAN

disconnection, all the external connections that go through this WAN will be

disconnected too. Only after the disconnected lines are reconnected can they

go through the standby system to connect with the Internet. Therefore, to avoid

a huge number of disconnections, users can activate this function to arrange

new connections through another WAN to the Internet. In this way, the effect of

any disconnection can be minimized.

Line-Dropped Period:

Input the time rule for the disconnection of this WAN service.

Line-Dropped

Scheduling:

Input how long the WAN service may be disconnected before the newly added

connections should go through another WAN to connect with the Internet.

Link Backup Interface

Select another WAN port as link backup when port binding is configured. Users

should select the port that employs the same ISP.

Shared- Circuit WAN

environment

If your WAN connects to a Switch, select “Enabled” to filter broadcast packets.

The default is “Disabled”.

MTU

MTU is abbreviation of Maximum Transmission Unit. “Auto” and “Manual” can

be chosen. The default value is 1500. Different value could be set in different

network environment. (e.g. ADSL PPPoE MTU: 1492) .The default is “Auto”.

After the changes are completed, click

“Apply”

to save the configuration, or click

“Cancel"

to leave without

making any changes.

- 31 -

Содержание MH-3400





























































































































































Результаты поиска

Содержание MH-3400

Отзывы:

Похожие инструкции для MH-3400

Бренды по названию

Популярные бренды

Planet MH-3400, Руководство пользователя

Результаты поиска

Содержание MH-3400

Отзывы:

Похожие инструкции для MH-3400

Бренды по названию

Популярные бренды