Page 70 of 97
Enter the v3 Read-write Username” snmpv3rwuser ”.
Enter the v3 Password“ snmpv3password ”.
Re-enter v3 Password to confirm it.
Enter the v3 Passphrase” snmpv3passphrase ”.
Re-enter v3 Passphrase to confirm it” snmpv3passphrase ”.
Click on
“Access control”
drop down menu to enable or disable access
control.
Click on top
“Apply”
button if you have made any changes. New settings are
active after the device reboot.
From
“Configure”
field, you can select
“Modify”
or
“Remove”
SNMP.
If you select to add new SNMP entry, SNMP Access Control – add page will
display as shown in Figure 3.5.3.2.
Figure 3.5.3.2: SNMP Access Control – add page
SNMP Access Control – add page contain the following parameter:
a.
Device
- Click on
“Device”
drop down menu to select device. For example, WAN,
MESH, VLAN0……
b.
Using
- Click on
“Using”
drop down menu to select “Device” or “Network”.
c.
Comments
- Enter comments for this entry.
d.
Active
- Click on
“Active”
drop down menu to enable or disable this entry.
e.
“Apply”
button - Click on
“Apply”
button to confirm add new SNMP. New settings are
active after the device reboot.
i.
If you select to edit existing SNMP, a page similar to Figure 3.5.3.2 with configured
settings will be displayed.
