Page 54 of 97
To configure PPTP Server:
a.
Click on
“Active”
drop down menu to enable or disable PPTP Server service.
b.
Enter the PPTP Server IP address.
c.
Enter Client Start address.
d.
Enter Client End address.
e.
Click on top
“Apply”
button if you have made any changes. New settings are active
after the device reboot.
f.
From
“Configuration”
field, you can select
“Modify”
or
“Remove”
PPTP user.
g.
If you select to add new PPTP user entry, PPTP User – add page will display as shown
in Figure 3.4.7.2.
Figure 3.4.7.2: PPTP User – add page
PPTP User
- add page contain the following parameter:
Username
– Enter the PPTP username.
Password
– Enter the PPTP password.
Reconfirm Password
- Re-enter PPTP password to confirm it.
IP
– Enter the IP address assigned to this user.
Comments
– Enter the PPTP comments.
Active
– Click on
“Active”
drop down menu to enable or disable this PPTP.
“Apply”
button – Click on
“Apply”
button to confirm add new PPTP User.
New settings are active after the device reboot.
h.
If you select to edit existing PPTP User, a page similar to Figure 3.4.7.2 with
configured settings will be displayed.
