Page 66 of 97
From
“Configure”
field, you can select
“Modify”
or
“Remove”
HTTPD.
Add new HTTPD Access control page is as shown in Figure 3.5.1.2.
Figure 3.5.1.2: HTTPD Access Control – add page
HTTPD Access Control page contains the following parameters:
a.
Device
– Click on
“Device”
drop down menu to select device. For example WAN,
MESH, VLAN0……
b.
Using
– Click on
“Using”
drop down menu to select using “Device” or “Network”.
c.
Comments
– Enter comments for this entry.
d.
Active
– Click on
“Active”
drop down menu to enable or disable this entry.
e.
“Apply”
button – Click on
“Apply”
button to confirm add new HTTPD. New settings
are active after the device reboot.
f.
If you select to edit existing HTTPD, a page similar to Figure 3.5.1.2 with configured
settings will be displayed.
