Planet IPX-600 Скачать руководство пользователя

Страница: 6 / 67

Chapter 1

Introduction

Overview

PLANET IPX-600 IP PBX Systems are designed and optimized for the SMB and SOHO daily

communications. Due to the IPX-600 is so easy to configure a fully working system with the

convenience and cost advantages, the IPX-600 is the next generation voice communication platform

for the SOHO and Home Office. Designed as an open, scalable and highly reliable telephony solution,

the future IP PBX System offers all of the essential features of telephony which is required for small

business/enterprise users on their telecommunication/data needs.

The IPX-600 is an embedded system with built-in SIP proxy server and NAT functions that make it

perfect for enterprise usage. The IPX-600 provides not only basic call functions on traditional PBX

System but also many advanced functions including voice mail to email, web management, roaming

etc. It is impossible on traditional PBX. Designed to run on a variety of VoIP applications, the

IPX-600 provides centralized call control, auto-attendant, voice conferencing and IP-based

communications. The IPX-600 utilizes standard phone lines via an interfaces of FXO gateway to

become a feature-rich PBX System that supports seamless communications among existing local calls,

IP phones and SIP-based endpoints, including low cost long distance service, telephone number

portability and one network for both voice and data.

The system’s stability is established by a very stable embedded system platform and the SD

(Secure Digital) memory card storage. Since all the system configurations (including voice mail) are

stored in the SD card storage, you could restore the whole system by just putting the SD card to a new

IPX-600 if the system is damaged. There is no re-configuration needed. In this way, the effort of

maintenance is minimized.

With the IPX-600, standard SIP phones can be easily integrated in your office. You may integrate

PLANET IP Phone VIP-154T series, IPX-600, and the VIP-156 / VIP-157 of ATA (analog telephone

adapter) series. And Gateway serves VIP-281/VIP-480/VIP-880/VIP-1680/VIP-2480 to build up the

VoIP network deployment in minutes.

Allowing distributed IP technology to meet traditional voice services with proactive managed

interface, the IPX-600 for enterprises in the daily business processes can make people more

productive, more intelligent tasks and more customer satisfaction.

Содержание IPX-600




































































Результаты поиска

Содержание IPX-600

Отзывы:

Похожие инструкции для IPX-600

Бренды по названию

Популярные бренды

Planet IPX-600, Руководство пользователя

Результаты поиска

Содержание IPX-600

Отзывы:

Похожие инструкции для IPX-600

Бренды по названию

Популярные бренды