so you have to change your NAT router’s mac address to
the NIC card mac address.
Table 5. WAN setting description
¾
ADSL Dial-Up User (PPPoE Enable)
Figure 9. WAN setting - PPPoE
Connection Type
Data required.
Wan Connection Type
Some ISPs provide DSL-based service and use PPPoE to
establish communication link with end-users. If you are connected
to the Internet through a DSL line, check with your ISP to see if
they use PPPoE. If they do, you need to select this item.
Login ID
Enter User Name provided by your ISP
Password
Enter Password provided by your ISP
Service Name
Enter you SIP Provider’s name
AC Name
Some PPPoE server requires you to fill in the AC Name.
MTU
MTU is the “Maximum Transfer Unit” that is the maximum payload
size that can bring by the PPPoE
Dial On Demand
It means when there are no traffic after certain seconds, it will
disconnect the PPPoE connection.
Auto Reconnect
It means keep alive
Table 6. WAN setting description
14
L
Hint
Please consult your ISP personnel to obtain proper PPPoE/IP
address related information, and input carefully.
If Internet connection cannot be established, please check
the physical connection or contact the ISP service staff
for support information.
