Planet IP DSLAM IDL-2400 Скачать руководство пользователя страница 596

Страница: 596 / 707

IDL series User Guide

596

Parameters:

Name

Description

control

<nvram|network>

This specifies whether the control plane binaries are to be

fetched from the network or the binaries already present in

NVRAM are to be used.

Type :

Optional

Default value:

Binary present in NVRAM.

dataplane

nvram|network

This specifies whether the data plane binaries are to be

fetched from the network or the binaries already present in

NVRAM are to be used.

Type:

Optional

Default value:

Binaries present in NVRAM.

config

<network|default|

last|backup|clean|minimu

This specifies the boot configuration – the

<last|backup|clean|minimum> source, from which to boot up.

The boot configuration is set to last automatically, whenever

a commit command is given. The boot configuration being an

optional parameter, if it is not specified, it retains the previous

value. So giving reboot after a commit will result in a reboot

from the committed configuration.

Default: Use Default factory configuration while booting up.

Backup: Use the Backup configuration to boot the system.

Last: Use last committed configuration to boot the system.

Minimum: Use a configuration in which:

• the size command is executed.

• the user (login name and password as root) is created.

• an Ethernet interface with IP address 192.168.1.1 mask

255.255.0.0 is created.

Clean: The system comes up with nothing configured.

Network: The system fetches the default configuration file

from the remote host and system comes up with this default

configuration, fd.cfg.

Type :

Optional

Default value:

If a reboot is being given for the first time,

then the default value is default. Otherwise, the default value

is the same as what was given the last time.

Содержание IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IP DSLAM IDL-2400

Отзывы:

Похожие инструкции для IP DSLAM IDL-2400

Бренды по названию

Популярные бренды

Planet IP DSLAM IDL-2400, Руководство пользователя

Результаты поиска

Содержание IP DSLAM IDL-2400

Отзывы:

Похожие инструкции для IP DSLAM IDL-2400

Бренды по названию

Популярные бренды