Planet IP DSLAM IDL-2400 Скачать руководство пользователя страница 320

Страница: 320 / 707

IDL series User Guide

320

Mask <

net-mask>

This parameter specifies the network mask configured for the interface.

This is given in conjunction with IP Address configured and shall be

given only if IP address has been given. This shall be removed whenever

IP Address is removed. ’Modify’ of network mask for an Ethernet

interface shall be supported only if some IP address is configured on the

interface or 'etherUseDhcp' was configured to "GS_TRUE" previously. If

Usedhcp is GS_TRUE and ’modify’ is done for this field, then usedhcp

field shall be set to GS_FALSE. Both usedhcp and this field shall not be

specified together.

Type :

This field is not allowed when a physical interface is specified and

IP is 0.0.0.0. In all other cases the field is mandatory.

Valid Values :

255.0.0.0 - 255.255.255.255

Default Value:

None

usedhcp

true | false

This parameter specifies whether a DHCP client is to be triggered to

obtain an IP address for this interface. If this is configured as GS_FALSE

and ‘etherIfIpAddress’ is not configured, then management IP traffic will

not flow through the interface. If an IP address is configured and ’modify’

is done for this field, then ‘tEtherIfIpAddress’ and ‘tAggrIfNetMask’ fields

shall be set to Zero (0.0.0.0). Both Usedhcp and ‘tEtherIfIpAddress’ shall

not be specified together. In case Iftype is ‘slave’, then this field can not

be set to GS_TRUE.

Type :

Optional

Valid value :

true or false

Default value:

false

speed

{auto |100 BT|

The Ethernet speed for the net-side interfaces.

Type

: Optional.

Valid Values

: auto, 100BT, 1000BT.

Default Value

: auto.

type

uplink|downink

This parameter specifies the type of the Ethernet interfaces. The Net is

towards the NET side (2 at most) and slave means the physical interface

connected to the slave device.

Type :

Optional.

Valid Values :

uplink, downlink.

Default Value :

uplink.

enable|disable Administrative

status of the Ethernet interface.

Type

: Modify - Mandatory

Valid values

: enable or disable

Default value

: enable

Содержание IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IP DSLAM IDL-2400

Отзывы:

Похожие инструкции для IP DSLAM IDL-2400

Бренды по названию

Популярные бренды

Planet IP DSLAM IDL-2400, Руководство пользователя

Результаты поиска

Содержание IP DSLAM IDL-2400

Отзывы:

Похожие инструкции для IP DSLAM IDL-2400

Бренды по названию

Популярные бренды