Planet IP DSLAM IDL-2400 Скачать руководство пользователя страница 471

Страница: 471 / 707

IP DSLAM

471

the system and each RID defines separate routes in context

of itself. . If VlanId <X> and RID <X> have been created and

the routing database is configured for IRD, than routes in RID

<X> shall define flow for packets coming on VLAN Id <X>.

The other mode for the database is SRD( Shared Routing

Database) where there is a single RID in the system and all

flows map to this RID. This RID has to be explicitly created

and no more than one RID can be created in the system in

this mode. Flows for all created VLANs shall map to this RID

for routing.

Ifname

This specifies the physical interface for the media. It

indicates the interface over which the IP address for which

the IP Net to media mapping has been created can be

reached.

Ip Address.

IP address corresponding to the media-dependent physical

address.

Type

This defines the type of mapping in use. The value Invalid

has the effect that this entry is not used. It may be: Static,

Dynamic, Other

Mac Address

The media-dependent physical address

Cautions:

The specified interface should pre-exist. Please refer to the create ethernetintf

command.

References:

delete arp command

get arp command

create ethernet intf command

ip route related commands

5.16.2 IP Route Commands

5.16.2.1 Get ip route

Description:

Use this command to get.

Command Syntax:

get ip route

[

rid

<rid-val>]

<dest-ip-address>

mask

<net-mask>

Содержание IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IP DSLAM IDL-2400

Отзывы:

Бренды по названию

Популярные бренды

Planet IP DSLAM IDL-2400, Руководство пользователя

Результаты поиска

Содержание IP DSLAM IDL-2400

Отзывы:

Бренды по названию

Популярные бренды