manualshive.com logo in svg

Planet IP DSLAM IDL-2400, Руководство пользователя

Поделиться
Скачать
Planet IP DSLAM IDL-2400 Скачать руководство пользователя страница 215

IP DSLAM 

 

215

Type:

 Modify 

－

 Optional  

Valid values: 

0  

forbidegressports 

<

forbidegressports-val> | 

none 

  The set of ports, configured by management in this VLAN, for 

which the Service Requirement attribute Forward Unregistered 

Multicast Groups, may not be dynamically registered by GMRP. 

More than one value can be given, separated by spaces.   

Type:

 Modify 

－

 Optional  

Valid values: 

0  

 

Example: 

$ get bridge mcast fwdunreg vlanid 1 

 

Output: 

VLAN Index                                                      : 1   

Forward Unregistered Ports           : 45  

Forward Unregistered Static Ports    : 1 2 3 6  

Forward Unregistered Forbidden Ports : 4 9 10 

 

Output Fields: 

Field 

 

Description 

 

VLAN Index 

 

The VLAN id for this VLAN. In devices supporting "Shared Vlan for 

multicast" capability, the information for a multicast MAC address is 

shared across VLANS. Hence, vlanid is not required and is passed as 

zero. In devices supporting "Independent Vlan for multicast" 

capability. Each vlan can have its own information for a multicast MAC 

address. Hence, VLAN id is a mandatory parameter and a valid value 

of vlanid must be passed. For No Vlan case VLAN id is not required. 

When Vlan transparency feature is supported, the valid range for 

vlanid also includes 4097. In case of "Shared Vlan Multicast also there 

shall always be a seperate entry for 4097 if the VLAN with that VLAN 

Id is created. VLAN here means the 802.1q Vlan in case of Native 

Vlan mode and Virtual Vlan in case of Stacked Vlan Mode.   

Forward Unregistered 

Ports 

 

The complete set of ports in this VLAN, to which multicast 

group-addressed frames for which there is no more specific 

forwarding information, will be forwarded. This includes ports, for 

which this need has been determined dynamically by GMRP, or 

configured statically by management.   

Forward Unregistered 

Static Ports 

 

  The set of ports, configured by management, in this VLAN, to which 

multicast group-addressed frames for which there is no more specific 

forwarding information, are to be forwarded. More than one value can 

Содержание IP DSLAM IDL-2400




































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды