Planet GSW-24040R Скачать руководство пользователя страница 326

Страница: 326 / 567

User’s Manual of SGSW-24040 / 24240 Series

326

•

Switch ID

The Switch ID (1-16) assigned to a switch. For more information, see description

of Switch IDs

Assigning and Swapping Switch IDs

When a switch is added to the stack, a Switch ID is automatically assigned to the

switch. The automatic SID assignment can be modified by choosing a different

Switch ID on the Stack Configuration page. This method allows Switch IDs to be

assigned so that it is easier for the user to remember the ID of each switch.

The Switch IDs of two switches can be swapped by simply interchanging the

values in the Switch ID column. Changing Switch IDs does not result in any

interruption of the stack operation.

Removing a Switch From the Stack

When a switch is removed from the stack, the configuration for the switch is

preserved, and the switch still appears on the Stack Configuration page. If the

configuration of the switch is not to be transferred to another switch, then the

configuration may be deleted by choosing Delete, followed by "Save".

Replacing a Switch

If a switch is to be replaced with another switch (for example, replacing failing

hardware), the following procedure must be used to assign the configuration of

the failing switch to the new hardware:

1. Remove the failing switch from the stack. For example, assume that the

failing switch had Switch ID 3.

2. Insert the new switch into the stack. The new switch is assigned an

unused Switch ID.

3. To remove the automatic switch ID assignment, choose "Delete",

followed by "Save". The new switch is then shown with Switch ID set to

"-".

4. To assign the configuration of Switch ID 3 to the new hardware, simply

choose 3 in the Switch ID column and click "Save".

5. The new hardware has now taken over the configuration of the failing

hardware.

General Switch ID Assignment Rules

When assigning Switch IDs to the devices in the stack, you must note the

following:

1. Switches with assigned IDs can be changed to use any other switch ID

(possibly by swapping Switch ID with another active switch).

2. When swapping two Switch IDs, the devices will retain their (own)

Содержание GSW-24040R
























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GSW-24040R

Отзывы:

Бренды по названию

Популярные бренды

Planet GSW-24040R, Руководство пользователя

Результаты поиска

Содержание GSW-24040R

Отзывы:

Бренды по названию

Популярные бренды