Planet GSW-24040R Скачать руководство пользователя страница 131

Страница: 131 / 567

User’s Manual of SGSW-24040 / 24240 Series

131

Buttons

: Click to add new VLAN.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

: Refreshes the displayed table starting from the "VLAN ID" input fields.

: Updates the table starting from the first entry in the VLAN Table, i.e. the entry with the lowest VLAN ID.

: Updates the table, starting with the entry after the last entry currently displayed.

4.6.6 VLAN Membership Status for User Static

This page provides an overview of membership status for VLAN users. The VLAN Membership Status for User Static screen in

Figure 4-6-4

appears.

Figure 4-6-4

VLAN Membership Status for User Static page screenshot

The page includes the following fields:

Object

Description

•

VLAN ID

Indicates the ID of this particular VLAN.

•

Port Members

The VLAN Membership Status Page shall show the current VLAN port members

for all VLANs configured by a selected VLAN User (selection shall be allowed by

a Combo Box). When ALL VLAN Users is selected, it shall show this information

for all the VLAN Users, and this is the default. VLAN membership allows the

frames Classified to the VLAN ID to be forwarded to the respective VLAN

member ports.

•

VLAN User

A VLAN User is a module that uses services of the VLAN management

functionality to configure VLAN memberships and VLAN port configuration such

as PVID, UVID. Currently we support following VLAN :

CLI/Web/SNMP

: This are reffered as static.

NAS

: NAS provides port-based authentication, which involves

communications between a Supplicant, Authenticator, and an Authentication

Содержание GSW-24040R
























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GSW-24040R

Отзывы:

Бренды по названию

Популярные бренды

Planet GSW-24040R, Руководство пользователя

Результаты поиска

Содержание GSW-24040R

Отзывы:

Бренды по названию

Популярные бренды