Planet GSW-24040R Скачать руководство пользователя страница 295

Страница: 295 / 567

User’s Manual of SGSW-24040 / 24240 Series

295

This network policy is potentially advertised and associated with multiple sets of application types supported on a given port.

The application types specifically addressed are:

1. Voice

2. Guest Voice

3. Softphone Voice

4. Video Conferencing

5. Streaming Video

6. Control / Signaling (conditionally support a separate network policy for the media types above)

A large network may support multiple VoIP policies across the entire organization, and different policies per application type.

LLDP-MED allows multiple policies to be advertised per port, each corresponding to a different application type. Different ports

on the same Network Connectivity Device may advertise different sets of policies, based on the authenticated user identity or

port configuration.

It should be noted that LLDP-MED is not intended to run on links other than between Network Connectivity Devices and

Endpoints, and therefore does not need to advertise the multitude of network policies that frequently run on an aggregated link

interior to the LAN.

Object

Description

•

Delete

Check to delete the policy. It will be deleted during the next save.

•

Policy ID

ID for the policy. This is auto generated and shall be used when selecting the

polices that shall be mapped to the specific ports.

•

Application Type

Intended use of the application types:

Voice

- for use by dedicated IP Telephony handsets and other similar appliances

supporting interactive voice services. These devices are typically deployed on a

separate VLAN for ease of deployment and enhanced security by isolation from

data applications.

Voice Signaling (conditional)

- for use in network topologies that require a

different policy for the voice signaling than for the voice media. This application

type should not be advertised if all the same network policies apply as those

advertised in the Voice application policy.

Guest Voice

- support a separate 'limited feature-set' voice service for guest

users and visitors with their own IP Telephony handsets and other similar

appliances supporting interactive voice services.

Guest Voice Signaling (conditional)

- for use in network topologies that require

a different policy for the guest voice signaling than for the guest voice media.

This application type should not be advertised if all the same network policies

apply as those advertised in the Guest Voice application policy.

Softphone Voice

- for use by softphone applications on typical data centric

devices, such as PCs or laptops. This class of endpoints frequently does not

support multiple VLANs, if at all, and are typically configured to use an 'untagged’

Содержание GSW-24040R
























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GSW-24040R

Отзывы:

Бренды по названию

Популярные бренды

Planet GSW-24040R, Руководство пользователя

Результаты поиска

Содержание GSW-24040R

Отзывы:

Бренды по названию

Популярные бренды