![background image](http://html1.mh-extra.com/html/planet-networking-and-communication/wdrt-730/wdrt-730_user-manual_1564012020.webp)
User Manual of WDRT-730
-13-
Chapter 4. Quick Installation Guide
This chapter will show you how to configure the basic functions of your Wireless Router using
Quick
Setup
within minutes.
A computer with wired Ethernet connection to the Wireless Router is required for the
first-time configuration.
4.1 Manual Network Setup - TCP/IP Configuration
The default IP address of the WDRT-730 is
192.168.1.1
. And the default Subnet Mask is
255.255.255.0. These values can be changed as you desire. In this guide, we use all the default
values for description.
Connect the local PC to the LAN ports of the Router. And then you can configure the IP address for
your PC in the following two ways.
Obtain an IP address automatically
Configure the IP address manually
In the following sections, we’ll introduce how to install and configure the TCP/IP correctly in
Windows
XP
. And the procedures in other operating systems are similar. First, make sure your Ethernet Adapter
is working, and refer to the Ethernet adapter’s manual if needed.
4.1.1 Obtain an IP Address Automatically
Summary:
Set up the TCP/IP Protocol in "
Obtain an IP address automatically
" mode on your PC.
Then the WDRT-730 built-in DHCP server will assign IP address to the PC automatically.
1. Install TCP/IP component
1) On the Windows taskbar, click the
Start
button, point to
Settings
, and then click
Control
Panel
.
2) Click
the
Network and Internet Connections
icon, and then click on the
Network
Connections
tab in the appearing window.
3) Right click the icon shown below, select Properties on the prompt window.