background image

Internet Features 

49 

Dynamic DNS (Domain Name Server) 

This free service is very useful when combined with the 

Virtual Server

 feature. It allows Inter-

net users to connect to your Virtual Servers using a URL, rather than an IP Address. 

This also solves the problem of having a dynamic IP address. With a dynamic IP address, your 
IP address may change whenever you connect, which makes it difficult to connect to you. 

The Service works as follows: 

1.  You must register for the service at one of the listed DDNS Service providers.  

2.  After registration, follow the Service Provider's procedure to request a Domain Name, and 

have it allocated to you. 

3.  Enter your DDNS data on VRT-311 / VRT-311S 's DDNS screen (shown below). 

4.  VRT-311 / VRT-311S will then automatically ensure that your current IP Address is 

recorded and updated at the DDNS server. 
If the DDNS Service provides software to perform this "IP address update"; you should 
disable the "Update" function, or not use the software at all. 

5.  From the Internet, users will be able to connect to your Virtual Servers (or DMZ PC) using 

your Domain name, as shown on this screen. 

 

Dynamic DNS Screen 

Select 

Internet

 on the main menu, then 

Dynamic DNS

, to see a screen like the following: 

 

Figure32: DDNS Screen 

Data - Dynamic DNS Screen 

DDNS Service 

DDNS Service 

• 

You must register for the service at one of the listed Service 
Providers. You can reach the Service provider's Web Site by se-
lecting them in the list and clicking the "Web Site" button. 

• 

Apply for a Domain Name, and ensure it is allocated to you. 

• 

Details of your DDNS account (Name, password, Domain name) 
must then be entered and saved on this screen. 

• 

This device will then automatically ensure that your current IP 
Address is recorded by the DDNS Service Provider. (You do 

Содержание VRT-311




















































































































































Отзывы: