Other Features and Settings
131
Remote Administration
Remote Administration allows you to connect to this interface via the Internet, using your Web
browser.
Figure118: Remote Administration Screen
Data - Remote Administration Screen
Information
Information
To establish a connection from the Internet:
1. Enable Remote Administration and configure this screen.
2. From a remote location, start your Browser.
3. In the "Address" or "Location" field, enter "
HTTPS//
" (NOT
"
HTTP//
"), the
Internet
IP address of this device (NOT the
LAN IP address), and the port number, as follows:
HTTPS://ip_address:port_number
Where:
ip address
is the Internet IP address of this device.
port number
is the port number assigned on this screen.
4. You should then be prompted for the password for this device.
(You must assign a password!)
Settings
Enable
Check this to allow administration/management via the Internet. (To
connect, see above).
If Disabled, this device will ignore management connection attempts
from the Internet.
IP Address
To manage this device via the Internet, you need to know the IP
Address of this device, as seen from the Internet. This IP Address is
allocated by your ISP, and is shown here if you are currently con-