28
4. Operation
4.1 Temperature control
1
Temperature control.
2
Half-loaded position.
3
Full-loaded position.
Initial operation:
1.
After installation wait 4 hours before you connect the appliance to the mains.
2.
Plug in the appliance.
3.
Set the temperature control to the full-loaded position (in clockwise direction).
4.
Let the appliance operate
without load
for 4 hours, so it can reach its proper
cooling temperature.
5.
You can store food in the appliance now.
6.
Low settings maintain the minimum cooling temperature, higher settings
maintain the maximum cooling temperature.
7.
When you store smaller amounts of food, the half-loaded position (3) is most
suitable. The full-loaded position (5) is most suitable for larger amounts.
8.
If you have disconnected the appliance from the energy supply, wait 10 minutes
before you restart the appliance. Otherwise the appliance can be damaged.
Switching off:
1.
Set the temperature control to position 0.
WARNING!
T
HE TEMPERATURE
-
CONTROL CONTROLS THE COMPRESSOR ONLY
.
You must unplug the appliance to disconnect it from the mains.
