27
6.
Fit the door on the top hinge pin.
7.
Remove the bottom hinge. Move the pin in the direction of the arrow.
8.
Unscrew the screw and install it on the opposite side.
9.
Install the bottom hinge on the opposite side leaving the position of the door
unchanged.
10.
Screw in the one screw in the place which is set free on the opposite side, as
well as the right feet.
11.
Level the appliance properly. Wait at least 4 hours before you connect the
appliance to the mains.
Finally check that:
all screws are tightened.
the door opens and closes properly. If the ambient temperature is low (e.g. in
winter), the gasket may not fit perfectly to the cabinet. Wait for natural fitting in
such a case.
If you do not want to carry out the above mentioned operations yourself, please
contact the aftersales service. The aftersales service can carry out the change of
the hinge position at your cost.
